Collect this siteContact us WELCOME TO VIST JINAN BAIHONG LASER TECHNOLOGY CO.,LTD!

JINAN BAIHONG LASER TECHNOLOGY CO.,LTD

"10 the balance model, meet different needs”Baihong, committed to the laser engraving, cutting, marking equipment production and sales

INTERNATIONAL SELAS HOTLINE:

0086-0531-6865-7167

INTERNATIONAL SELAS HOTLINE

0086-0531-6865-7167
How to choose laser cutting machine
inputtime:2019-12-24 Click browse:
Laser cutting machine and other equipment have their own selection criteria in the whole purchase process. In fact, to select such equipment, it is necessary to determine the final production range of Zui, and make effective selection according to the processing materials or cutting thickness, so as to determine the number of purchased equipment or the corresponding machine model. In order to do a good job in the follow-up procurement and basic work, how to choose laser cutting machine, there are more selection criteria.
1、 Fine cutting
When choosing and purchasing laser cutting machines, we should also pay attention to their cutting fineness, which can be basically controlled between 0.1mm and 0.2mm.
2、 Smoothness of cutting surface
In the actual cutting process of laser cutting machine, the finish of the cutting surface is also very important, to see if they have some burr on the cutting surface. Generally speaking, laser cutting machine has some burr more or less, which basically depends on the thickness of cutting or the gas used. There is no burr less than 3mm, the gas is the best nitrogen, and the effect of oxygen is second. If there is air, the effect is the worst. The burr of fiber laser cutting machine is relatively less, and even the surface without burr is very smooth.
3、 Observe the deformation of the material
If the laser cutting machine is used for cutting, the material deformation effect of the good equipment is very small.
4、 Look at the power
Most manufacturers have their own power requirements for laser cutting machines and other equipment. Judging from the current situation, most factories are also cutting metal plates below 6mm, so there is no need to buy high-power cutting machine.

在线客服